Squaraine Dyes for Photovoltaic and Biomedical Applications

Squaraine dyes (SQs) are an important class of polymethine dyes with a unique reasonable-stabilized zwitterionic structure, in which electrons are highly delocalized over the conjugated bridge. These dyes can not only be easily synthesized via a condensation, but also exhibit intense absorption and emission in the visible and near-infrared region with excellent photochemical stability, making them attractive material candidates for many photoelectric and biomedical applications. Thus, in this review, after an introduction of SQs, the recent advances of SQs in the photovoltaic field are comprehensively summarized including dye-sensitized solar cells, organic solar cells, and perovskite solar cells. Then, the important advances in the use of SQs as the biosensors, biological imaging, and photodynamic/photothermal therapy reagents in the biomedical field are also discussed. Finally, a summary and outlook will be provided with some new perspectives for the future design of SQs.     

基于温度冲击的冷冻靶氘氘冰层结晶生长行为研究

惯性约束聚变冷冻靶中氘氘（D₂）冰层的质量对聚变实验的成功与否起重要作用。目前文献报道的制备冷冻靶D₂冰层的方法并不具备好的可操作性，且技术、工艺不定型，制约了高质量冰层的形成。因此，本文采用将温度梯度、降温速率和温度冲击相结合的技术实现燃料冰层在靶丸内的均化。通过温度控制以及施加温度冲击可控地形成残留冰，并在残留冰的控制技术基础上，实现了高质量冰层的可控结晶生长。同时，研究了温度控制对靶丸内D₂冰层品质的影响和D₂冰层结晶生长的过程，并应用晶体生长动力学理论分析了D₂冰层结晶生长行为。从背光阴影图像中的D₂冰层亮环可知，D₂冰层均匀度为85.2%、厚度为40.35 μm、内表面粗糙度为2.15 μm。本方法拓宽了超低温下D₂冰籽晶控制、晶体生长技术，为DT冷冻靶中冰层均化打下了坚实基础，并形成了一定的技术储备。     

扫描隧道显微镜钨针尖的制备与表征

采用直流电化学刻蚀方法制备扫描隧道显微镜钨针尖,研究了电化学刻蚀过程中NaOH溶液浓度、钨丝浸入长度和刻蚀电压对针尖形貌的影响。通过扫描电子显微镜(SEM)测量针尖曲率半径和针尖纵横比值,以表征针尖的尺寸和形状;通过能谱仪(EDS)分析针尖表面成分,以表征表面清洁度;通过场发射显微镜(FEM)得到Fowler-Nordheim (F-N)曲线来检测针尖发射性能。实验结果表明,当溶液浓度为2 mol/L、钨丝浸入长度为4 mm、刻蚀电压为3 V时,可以得到曲率半径约为100 nm、纵横比值为13的针尖,且表面无钨的氧化层。FEM结果显示当对针尖施加500 V的负偏压时,针尖可以稳定发射50 nA量级的电流,且针尖性能具有良好的一致性。     

Bacterium‐Templated Polymer for Self‐Selective Ablation of Multidrug‐Resistant Bacteria

The recognition and inactivation of specific pathogenic bacteria remain an enormous scientific challenge and an important therapeutic goal. Therefore, materials that can selectively target and kill specific pathogenic bacteria, without harming beneficial strains are highly desirable. Here, a material platform is reported that exploits bacteria as a template to synthesize polymers with aggregation‐induced emission (AIE) characteristic by copper‐catalyzed atom transfer radical polymerization for self‐selective killing of the bacteria that templates them with no antimicrobial resistance. The bacteria‐templated polymers show very weak fluorescence in aqueous media, however, the fluorescence is turned on upon recognition of the bacteria used as the template to synthesize the polymer even at a low concentration of 600 ng mL^?1. Moreover, the incorporated AIE fluorogens (AIEgens) can act as an efficient photosensitizer for reactive oxygen species (ROS) generation after bacteria surface binding, which endows the templated polymers with the capability for selective bacterial killing. The bacterium‐templated synthesis is generally applicable to a wide range of bacteria, including clinically isolated multidrug‐resistant bacterial strains. It is envisioned that the bacterium‐templated method provides a new strategy for bacteria‐specific diagnostic and therapeutic applications.     

Mapping haze-komi on rice koji grains using β-glucuronidase expressing Aspergillus oryzae and mass spectrometry imaging

1. Download : Download high-res image (148KB)
2. Download : Download full-size image

     

远程控制超声扫描的远端操纵系统

针对远程超声扫描,研制了一种远端操纵系统,并实现了超声探头的人机协作控制。探头控制中利用远端操纵系统网传信号实时复现远端操作员的扫描动作,并在此基础上利用阻抗控制方式自动控制探头对皮肤的压力。实验结果表明:近端超声探头的位置误差和姿态误差分别保持在±2.0 mm和±1.5°以内,能较好地复现操作员的扫描动作;探头压力跟踪误差稳定在±0.5 N的范围内,不但能将操作员的扫描手感真实地施加到皮肤上来提升其临场感,而且为进一步提高超声图像的质量,增强超声扫描的安全性提供了参考。     

红外热成像在乳腺疾病检测的应用研究

乳腺疾病已严重危害女性身心健康,其中乳腺癌更位居全球范围内女性癌症发病率和死亡率首位,因此乳腺癌的早期发现意义重大。传统结构影像学早期检测疾病具有一定局限性,而红外热成像作为功能成像技术可为乳腺癌的早期筛查提供有效线索。因此本文主要就红外热成像在乳腺疾病的早期检测及预后评估的应用价值进行综述。     

频率可调太赫兹回旋振荡管互作用电路的设计与研究

根据动态核极化核磁共振成像技术对回旋振荡管的要求,设计了130 GHz 回旋振荡管的注波互作用电路,基于线性理论对互作用电路进行了研究并选择了合适的工作点,分析了电路的频率调节特性。利用相对论电子回旋脉塞非线性理论对互作用系统进行了模拟和计算,优化了工作参数,计算了磁场及电子注参数对输出功率及效率的影响。最后,用粒子模拟方法进行了模拟并与非线性理论结果进行了比较,两者符合得很好。模拟结果显示,当电压为10 kV、电流为0.3 A、磁场强度由2.34 T 增加到2.41 T 时,输出功率由1310 W 减小到230 W,对应的效率分别为43.6%和7.7%,振荡管的频率可调范围约为2.7 GHz。